Manufacturing Technology (Bachelor of Engineering, L7, 60 ECTS)

Course Overview

The aim of this programme is to provide a progression route in the area of Manufacturing Technology, for qualified advanced craft-persons and national/higher certificate holders with qualifications at, or equivalent, to level 6 on the NQAI framework. The Bachelor of Engineering in Manufacturing Technology seeks to provide a programme that is learner-centred in terms of flexibility of quantity, duration, timing and pace of study.

Module List for September 2025

• Electrical Machines
• Programmable Logic Controller Systems (PLCs)
• Industrial Maintenance Systems
• Project Management

Entry Requirements

A candidate should have relevant experience in a technical role in the electrical services or industrial sector. A candidate must also meet the following minimum entry requirements:

• Level 6 Advanced Certificate in Craft in Manufacturing (or equivalent trade)
• National or Higher Certificate in Engineering or Technology with specialisation in Electrical, Electronic, Electromechanical or Industrial Engineering, or equivalent, at Pass level. (HETAC/FETAC Level 6 Qualification)
• Prior experiential learning and/or experience deemed to meet the criteria for an award at level 6 as set out in the NQAI Framework
• Recognised Prior Learning (RPL) – Assessment

Course Content

Sample Modules

• Mathematics 1* (Mandatory)
  • Credits: 5
  • The aim of this module is to provide the learner with a broad knowledge of the application of engineering maths and applied statistics.
• Project Management* (Mandatory)
  • Credits: 5
  • To provide the learner with a broad knowledge of the techniques, software tools and approaches used in project management in industry.
• Industrial Project* (Mandatory)
  • Credits: 10
  • To provide the learner with the opportunity to develop their independent leadership and project management skills through the study, analysis and resolution of a work-based project.
• Manufacturing and Operations Engineering* (Mandatory)
  • Credits: 5
  • To provide the learner with a broad knowledge of modern Operations and Manufacturing engineering/management as it applies to a variety of businesses and organisations by providing a logical path through the activities of Operations Engineering and its strategic context.
• Advanced PLC Systems (Elective)
  • Credits: 5
  • To provide the learner with a specialised knowledge of advanced automation systems, structured programming approaches and distributed control applications.
• Electrical Machines (Elective)
  • Credits: 5
  • The aim of the module is to provide the learner with specialist knowledge of the types, sizing, characteristics and applications of single and three-phase AC and DC motor in manufacturing facilities.
• Energy Efficiency in Industry (Elective)
  • Credits: 5
  • The aim of the module is to provide the learner with specialist knowledge of and analysis methods for energy usage in industry with a focus on energy efficiency and carbon emission reduction.
• Programmable Logic Controller Systems (Elective)
  • Credits: 5
  • The module aims to provide the learner with a broad knowledge of automation systems, programming approaches and industrial control applications.
• Distributed Electrical Systems (Elective)
  • Credits: 5
  • The aim of the module is to provide the learner with specialised knowledge of the efficiency and electrical integration of electrical equipment and plant in a manufacturing facility.
• Embedded Systems (Elective)
  • Credits: 5
  • To provide the learner with a broad knowledge of embedded computer system including processors, hardware systems, operating system, single board computer, development environments and programming.
• Computer Networks (Elective)
  • Credits: 5
  • The aim of this module is to introduce the learner to Computer networks including infrastructure, operating systems, network management, data protection and internet technology.
• Computer Systems (Elective)
  • Credits: 5
  • To provide the learner with a broad knowledge of computer system including cloud and mobile computing, components, storage and memory systems, operating systems and diagnostics.
• HMI and SCADA (Elective)
  • Credits: 5
  • This subject aims to give the learner the skills needed to successfully design, develop and integrate a SCADA solution in industry.
• Management Accounting and Methods (Elective)
  • Credits: 5
  • The aim of this module is to provide the learner with a broad knowledge of costs applied to the value chain in industry and management techniques to control them.
• Quality Methods (Elective)
  • Credits: 5
  • To provide the learner with a broad knowledge of modern quality management methods, standards and techniques used in manufacturing.
• Website Programming and Development (Elective)
  • Credits: 5
  • To provide the learner with a broad knowledge of Internet and web technologies. Emphasis is placed on how to establish an online presence by learning the tools to plan, construct and manage web based applications.
• Database Development (Elective)
  • Credits: 5
  • To provide the learner with a broad knowledge of the application, construction, programming and management of database systems.
• Industrial Logistics (Elective)
  • Credits: 5
  • To provide the learner with a broad knowledge of supply chain structures, methods, management and product tracking.
• Computer Aided Manufacturing (Elective)
  • Credits: 5
  • To provide the learner with a specialised knowledge of integrated computer aided prototyping and manufacturing of products.
• Computer Aided Design (Elective)
  • Credits: 5
  • Computer Aided Design is an essential communication and design technique for those involved in engineering. The aim of this module is to give the student a comprehensive introduction to the standards used in the preparation of Engineering drawings.
• Electronics Testing Methods (Elective)
  • Credits: 5
  • To provide the learner with a specialised knowledge of testing, debugging and faultfinding electronic printed circuit boards and systems.
• Electronics Manufacturing (Elective)
  • Credits: 5
  • To provide the learner with a broad knowledge of the design, development and fabrication of electronic products, printed circuit boards and systems.
• Electrical Power Systems (Elective)
  • Credits: 5
  • To provide the learner with specialised knowledge of the types, characteristics and applications of power supply and storage systems.
• Electrical and Instrumentation CAD (Elective)
  • Credits: 5
  • The aim of this module is to Design and Create Electrical, Instrumentation and Control drawings.
• Instrumentation and Calibration (Elective)
  • Credits: 5
  • The aim of this module is to provide learners with the knowledge of industrial process instrumentation, calibration and control which includes the concepts, engineering and installation of control and measurement equipment.
• Industrial Maintenance Systems (Elective)
  • Credits: 5
  • This module aims to provide the learner with a broad knowledge of modern maintenance strategies, management approaches and control systems.
• Polymer Processing Technology (Elective)
  • Credits: 5
  • The Polymer Processing Module focuses on the materials, processes and tooling used in relation to polymers, particularly the common polymer processes of injection moulding and extrusion and the characteristics of various polymers.
• Solar Energy Systems (Elective)
  • Credits: 5
  • The aim of this module is to give learners a detailed understanding of the operation and application of PhotoVoltaic and Solar Thermal Systems.
• Intelligent Vision Systems for Industry (Elective)
  • Credits: 5
  • To provide a knowledge of computer vision including fundamentals of image formation, camera imaging geometry, feature detection and matching, multiview geometry including stereo, motion estimation and tracking, and classification.
• Renewable Energy Technology 2 – Wind Energy (Elective)
  • Credits: 5
  • To give the learner a thorough introduction to the conversion of wind energy into electrical energy.

Delivery

• The proposed delivery schedule is subject to change.
• Successful applicants must complete 11 modules, including a work-based project in order to complete the required 60 credits.
• Each module is 12 weeks in duration, one evening per week.
• A range of modules are offered in Semester 1 (September to December) and in Semester 2 (January to May) each academic year.
• Modules are a mix of online, blended and classroom based.
• All classroom-based elements will take place onsite at the Moylish campus in Limerick.
• Degree registered students will be contacted twice yearly with the selection of modules available for the coming Semester.

Time Commitment

• Each 5 credits will normally equate to approximately 100 Total Learning Hours.
• Total Learning Hours includes the time you spend in class (lectures, tutorials, practical elements) and the time you spend completing work outside of college.
• The balance between these two varies by discipline, and by level of study.
• You should bear in mind that the workload will increase at particular times e.g. when assignments are due.

Assessment

• Modules are assessed using a mixture of continuous assessment and examinations.
• It is important to note that final module exams normally take place mid-week and during normal working hours.

Qualification

• Bachelor of Engineering in Manufacturing Technology (Level 7, 60 ECTS)

Fees

• The total fee for this programme is €7,425.
• 5 credit modules – €675
• 10 credit Project – €675

Application Deadline

• 10th June 2025

The program aims to provide a progression route in the area of Manufacturing Technology, offering flexibility in terms of quantity, duration, timing, and pace of study.

---

Outline:

---

Program Content:

The program requires the completion of 11 modules, including a work-based project, totaling 60 ECTS credits. Each module is 12 weeks in duration, with one evening of class per week. Modules are offered in two semesters: Semester 1 (September to December) and Semester 2 (January to May). The program utilizes a mix of online, blended, and classroom-based learning. All classroom-based elements take place at the Moylish campus in Limerick.

---

Course Schedule:

• Students typically complete 2 modules per semester.
• Degree registered students are contacted twice yearly to select available modules for the upcoming semester.

---

Individual Modules:

---

Mandatory Modules:

• Mathematics 1: Provides knowledge of engineering maths and applied statistics.
(5 credits)
• Project Management: Covers techniques, software tools, and approaches used in project management.
(5 credits)
• Industrial Project: Develops independent leadership and project management skills through a work-based project.
(10 credits)
• Manufacturing and Operations Engineering: Explores modern Operations and Manufacturing engineering/management.
(5 credits)

---

Elective Modules:

• Advanced PLC Systems: Focuses on advanced automation systems, structured programming, and distributed control applications.
(5 credits)
• Electrical Machines: Covers types, sizing, characteristics, and applications of AC and DC motors.
(5 credits)
• Energy Efficiency in Industry: Provides knowledge of energy usage analysis methods in industry, emphasizing efficiency and carbon reduction.
(5 credits)
• Programmable Logic Controller Systems: Introduces automation systems, programming approaches, and industrial control applications.
(5 credits)
• Distributed Electrical Systems: Covers the efficiency and electrical integration of equipment and plant in a manufacturing facility.
(5 credits)
• Embedded Systems: Explores embedded computer systems, including processors, hardware, operating systems, and programming.
(5 credits)
• Computer Networks: Introduces computer networks, infrastructure, operating systems, and internet technology.
(5 credits)
• Computer Systems: Covers cloud and mobile computing, components, storage, memory systems, and operating systems.
(5 credits)
• HMI and SCADA: Develops skills for designing, developing, and integrating SCADA solutions.
(5 credits)
• Management Accounting and Methods: Explores costs applied to the value chain and management techniques for control.
(5 credits)
• Quality Methods: Covers modern quality management methods, standards, and techniques used in manufacturing.
(5 credits) (5 credits)
• Database Development: Covers the application, construction, programming, and management of database systems.
(5 credits)
• Industrial Logistics: Explores supply chain structures, methods, management, and product tracking.
(5 credits)
• Computer Aided Manufacturing: Provides specialized knowledge of integrated computer-aided prototyping and manufacturing.
(5 credits)
• Computer Aided Design: Introduces engineering drawing standards and utilizes 3D CAD software.
(5 credits)
• Electronics Testing Methods: Covers testing, debugging, and faultfinding electronic printed circuit boards and systems.
(5 credits)
• Electronics Manufacturing: Explores the design, development, and fabrication of electronic products and systems.
(5 credits)
• Electrical Power Systems: Covers types, characteristics, and applications of power supply and storage systems.
(5 credits)
• Electrical and Instrumentation CAD: Focuses on designing and creating electrical, instrumentation, and control drawings.
(5 credits)
• Instrumentation and Calibration: Provides knowledge of industrial process instrumentation, calibration, and control.
(5 credits)
• Industrial Maintenance Systems: Covers modern maintenance strategies, management approaches, and control systems.
(5 credits)
• Polymer Processing Technology: Focuses on materials, processes, and tooling used in polymer processing, particularly injection molding and extrusion.
(5 credits) (5 credits) (5 credits)
• Renewable Energy Technology 2 – Wind Energy: Introduces the conversion of wind energy into electrical energy.
(5 credits)

---

Assessment:

Modules are assessed using a combination of continuous assessment and examinations.

---

Other:

• The program is delivered in a blended format, combining online, blended, and classroom-based learning.
• The program is subject to change.
• The workload will increase at particular times, such as when assignments are due.
• The program is run subject to viable numbers.
• The application deadline is May 31st, 2024.
Places are allocated on a first-come, first-served basis.

---

The total fee for this programme is €6,925. 5 credit modules – €625 10 credit Project – €675

Technological University of the Shannon (TUS)

---

Overview:

Technological University of the Shannon (TUS) is a multi-campus university in Ireland, offering a wide range of undergraduate and postgraduate programs across various disciplines. It is known for its focus on applied learning and innovation, fostering strong industry ties and providing excellent employment opportunities for its graduates.

---

Services Offered:

TUS provides a comprehensive range of services to its students, including:

Admissions & Support:

Admissions guidance, international student support, open days, student finance information, induction programs, and student support services.

Campus Life:

Accommodation options, career and employability services, chaplaincy and pastoral care, disability supports, learning support, student counselling, student health services, sports facilities, student union, clubs and societies.

Faculty Areas:

Business, Hospitality & Humanities, Engineering, Built Environment & Informatics, Sciences, Health & Technology, and Limerick School of Art & Design.

---

Student Life and Campus Experience:

TUS prioritizes a student-first approach, offering small class sizes and personalized attention. Students can expect a vibrant campus life with a range of clubs, societies, and sports activities. The university also provides comprehensive support services to ensure a positive and enriching student experience.

---

Key Reasons to Study There:

Applied Learning & Innovation:

TUS emphasizes practical skills and real-world application, preparing students for successful careers.

Strong Industry Ties:

The university has strong connections with industry partners, providing students with valuable internship and employment opportunities.

Excellent Employment Opportunities:

TUS graduates are highly sought after by employers, with a strong track record of successful career outcomes.

Vibrant Campus Life:

Students can enjoy a diverse and engaging campus experience with a range of clubs, societies, and sports activities.

Comprehensive Support Services:

TUS provides a wide range of support services to ensure students' academic and personal success.

---

Academic Programs:

TUS offers a wide range of academic programs, including:

Undergraduate:

Programs in various disciplines, including business, engineering, science, technology, art, and design.

Postgraduate:

Master's and PhD programs in specialized fields.

Apprenticeships:

Programs in various trades and technical fields.

Flexible & Professional Learning:

Programs designed for working professionals.

---

Other:

TUS is a QS 5 Star Rated University, recognized for its high-quality education and research. The university is also actively involved in research and development, with a focus on areas of national and global importance.